Description
MT-X3 is a 2G GPS padlock which is specially designed for containers and other types of trailers. It has 6000 mAh high-capacity lithium battery built inside, the device can last more than one month after each full charge if sending gps data every two hours.
Product Introduction:
Highlights
◆ Multiple ways to lock/unlock padlock: password/ID card/mobile app
◆ Anti-Tamper: High strength alloy, stainless steel lock rod embedded. Combining mechanical and electronic double closure, the lock rod seal can stand weight > 100kg
◆ Lower power consumption, less than 15uA while in sleep mode
◆ IP67 waterproof
◆ Build in G-sensor
◆ Support tamper proof alarm
◆ Multiple position mode: GPS, AGPS, LBS
◆ Supports OTA upgrading, reduce maintenance on site
Product Function:
Function
◆ Position and monitor
◆ GPS Positioning
◆ AGPS Positioning
◆ LBS Positioning（Need map database support）
◆ Intelligent Tracking
◆ Battery Level Detect
◆ Blind Zone Compensation
◆ Bluetooth
◆ RFID
Product Parameter:
Specification
| Physical | Dimension | 123mm*93mm*49.5mm（L*W*H） |
| Weight | 276g | |
| display | 0.96 inch OLED screen | |
| Cellular | Communication module | SIMCOM module |
| Frequency | 2G GSM 850/900/1800/1900MHZ | |
| GPS | Channels: 50
Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
|
| Power | Battery | 6000 mAh high-capacity lithium battery |
| Power consumption | Average working current <100mA; Power save current <15uA; | |
| Device last time | Real- time tracking mode: endurance ability >7 days (3 minutes reported in a location information); Pre-set mode: endurance ability >30 days (2 hours reported in a location information) | |
| Environmental Parameter | Working Temperature | -20℃~ +70℃ |
| Humidity | 5%~95% (no fog) | |
| Ingress Protection Rating | IP67 | |
Reviews
There are no reviews yet.